Service areas / Los Angeles County
Concrete, pavers and masonry in Walnut
Walnut is about 10 miles east of our Whittier base. Driveways, patios, block walls and backyards, with Jose quoting every job himself, free.
Building in Walnut
Hillside lots change the job. Slopes mean retaining walls, steps and careful drainage, and access for a concrete truck or pump can take planning.
- Retaining walls and steps are common on sloped lots
- Water has to be carried away from the house and off the hill, not into the neighbor's yard
- Steep or tight access can mean a concrete pump
What we build here
Prices
Rough prices in Walnut
2026 installed ranges for the jobs we build most in the foothills and hillside neighborhoods. Same numbers as our calculator.
| Job | Rough installed price |
|---|---|
| Retaining wall40 ft, 3 ft tall | $6,200 to $10,400 |
| Concrete steps3 steps | $1,500 to $2,100 |
| Concrete drivewayTwo car, 20 x 24 ft | $5,300 to $7,200 |
| Paver patioTypical, 12 x 20 ft | $4,800 to $7,700 |
| Outdoor living area400 sq ft | $12,800 to $22,000 |
| Concrete walkway4 x 30 ft | $1,500 to $2,100 |
Planning numbers. Jose's free on-site quote is the real price. All cost guides
Permits in Walnut
Permits for work in Walnut go through the City of Walnut. Under the California Building Code, flat work like a patio or walkway on grade usually needs no building permit, but a new driveway approach or curb cut needs a permit for work in the street, and walls over the code limits need one too. Jose checks what your job needs when he quotes it, and pulls any permit as part of the job.
Questions from Walnut homeowners
Do you work in Walnut?
Yes. Walnut is about 10 miles east of our Whittier base. We build concrete, pavers, block walls and backyard hardscape in Walnut and across Los Angeles County.
How much does a concrete driveway cost in Walnut?
A two-car concrete driveway (about 480 sq ft) runs about $5,300 to $7,200 installed with a broom finish, in 2026 Southern California prices. Tear-out of an old driveway adds about $3 to $7 per sq ft.
Do I need a permit in Walnut?
Permits for work in Walnut go through the City of Walnut. Under the California Building Code, flat work like a patio or walkway on grade usually needs no building permit, but a new driveway approach or curb cut needs a permit for work in the street, and walls over the code limits need one too. Jose checks what your job needs when he quotes it, and pulls any permit as part of the job.
How do I get a quote in Walnut?
Fill out the short quote form with your zip code. Jose looks at every request himself, comes out to see the job and gives you a written price, free.