Cost guides / Masonry
Block wall cost in Southern California
About $6,000 to $9,900 for a 60 ft, 6 ft tall job, installed, 2026 prices for Los Angeles and Orange County.
Prices by size and finish
| Size | Block with a cap | Stucco finish | Stone veneer |
|---|---|---|---|
| 40 ft, 6 ft tall | $4,000 to $6,600 | $5,000 to $8,400 | $5,600 to $9,800 |
| 60 ft, 6 ft tall | $6,000 to $9,900 | $7,500 to $12,600 | $8,400 to $14,700 |
| 100 ft, 6 ft tall | $10,000 to $16,500 | $12,500 to $21,000 | $14,000 to $24,500 |
| 60 ft, 4 ft tall | $4,450 to $7,200 | $5,950 to $9,900 | $6,850 to $12,000 |
Planning numbers, installed, for Southern California homes. Smallest job about $1,500. Tear-out and site work are extra unless listed.
How the price is built
Base price per linear foot, by height:
- 3 ft tall: $60 to $100 per linear ft
- 4 ft tall: $74 to $120 per linear ft
- 5 ft tall: $88 to $143 per linear ft
- 6 ft tall: $100 to $165 per linear ft
Finishes
- Block with a cap: included
- Stucco finish: +$25 to $45 per linear ft
- Stone veneer: +$40 to $80 per linear ft
Extras
- Remove an old wall or fence: $15 to $30 per linear ft
Most privacy walls are 6 ft tall.
A wall is only as good as its footing.
Leaning block walls and bulging retaining walls almost always trace back to a shallow footing, missing steel, or water with nowhere to go.
Footing, steel, block, grout, drainage.
We dig and pour a footing with steel, lay block straight and plumb, grout the cells, and give retaining walls drainage behind them so water does not push.
What is included
- Labor and materials
- Base prep and forms
- Steel where the job needs it
- Cleanup
Questions
How much does a block wall cost in Southern California?
For a 60 ft, 6 ft tall job, plan on about $6,000 to $9,900 installed in 2026 with a block with a cap. Stone veneer brings it to about $8,400 to $14,700. Jose's free on-site quote is the real number.
What is the price per linear ft for a block wall?
It depends on the height: 3 ft tall runs $60 to $100 per linear ft, 4 ft tall runs $74 to $120 per linear ft, 5 ft tall runs $88 to $143 per linear ft, 6 ft tall runs $100 to $165 per linear ft.
What do the extras cost?
Remove an old wall or fence: $15 to $30 per linear ft.
What is the smallest job you take?
Our smallest job is about $1,500. Small pads and short walls usually land at that minimum.
What is not included in these prices?
Tear-out unless listed, grading on a steep yard, engineering for walls over 4 ft, and gas, drain or other permits. Access and soil can move the price, so Jose prices those on site.
Where we build block walls
Based in Whittier and working across Los Angeles, Orange County and the Inland Empire. Nearby cities: Whittier, South Whittier, La Habra Heights, La Mirada, Santa Fe Springs, Pico Rivera, Montebello, Downey, Norwalk, Bellflower, Cerritos, Artesia, and every city we serve.