Service areas / Los Angeles County
Concrete, pavers and masonry in Torrance
Torrance is about 20 miles southwest of our Whittier base. Driveways, patios, block walls and backyards, with Jose quoting every job himself, free.
Building in Torrance
Lots are tighter, side yards are narrow and many homes are older. Access often decides how the job gets built: a small skid steer, a concrete pump or a lot of wheelbarrow trips.
- Narrow side yards can mean a concrete pump or line pump
- Street parking for the truck sometimes needs planning with the city
- Older homes often have old drain lines under the slab area worth checking first
Prices
Rough prices in Torrance
2026 installed ranges for the jobs we build most in central Los Angeles and the South Bay. Same numbers as our calculator.
| Job | Rough installed price |
|---|---|
| Concrete drivewayTwo car, 20 x 24 ft | $5,300 to $7,200 |
| Concrete patioTypical, 12 x 20 ft | $2,150 to $3,350 |
| Paver patioTypical, 12 x 20 ft | $4,800 to $7,700 |
| Concrete walkway4 x 30 ft | $1,500 to $2,100 |
| Block wall60 ft, 6 ft tall | $6,000 to $9,900 |
| Outdoor living area400 sq ft | $12,800 to $22,000 |
Planning numbers. Jose's free on-site quote is the real price. All cost guides
Permits in Torrance
Permits for work in Torrance go through the City of Torrance. Under the California Building Code, flat work like a patio or walkway on grade usually needs no building permit, but a new driveway approach or curb cut needs a permit for work in the street, and walls over the code limits need one too. Jose checks what your job needs when he quotes it, and pulls any permit as part of the job.
Questions from Torrance homeowners
Do you work in Torrance?
Yes. Torrance is about 20 miles southwest of our Whittier base. We build concrete, pavers, block walls and backyard hardscape in Torrance and across Los Angeles County.
How much does a concrete driveway cost in Torrance?
A two-car concrete driveway (about 480 sq ft) runs about $5,300 to $7,200 installed with a broom finish, in 2026 Southern California prices. Tear-out of an old driveway adds about $3 to $7 per sq ft.
Do I need a permit in Torrance?
Permits for work in Torrance go through the City of Torrance. Under the California Building Code, flat work like a patio or walkway on grade usually needs no building permit, but a new driveway approach or curb cut needs a permit for work in the street, and walls over the code limits need one too. Jose checks what your job needs when he quotes it, and pulls any permit as part of the job.
How do I get a quote in Torrance?
Fill out the short quote form with your zip code. Jose looks at every request himself, comes out to see the job and gives you a written price, free.