Service areas / San Bernardino County
Concrete, pavers and masonry in Upland
Upland is about 25 miles east of our Whittier base. Driveways, patios, block walls and backyards, with Jose quoting every job himself, free.
Building in Upland
Summers often run over 100 degrees, lots are bigger, and many neighborhoods are newer. Clay soils that swell when wet and shrink when dry are common in parts of the region, so the base matters.
- Hot summers mean early pours and careful curing
- Expansive clay soil in some areas calls for a deeper, well-compacted base
- Bigger lots mean RV pads, side-yard slabs and wide driveways
What we build here
Prices
Rough prices in Upland
2026 installed ranges for the jobs we build most in the Inland Empire and inland valleys. Same numbers as our calculator.
| Job | Rough installed price |
|---|---|
| Concrete slab or padSide yard, 10 x 30 ft | $2,400 to $3,900 |
| Concrete drivewayTwo car, 20 x 24 ft | $5,300 to $7,200 |
| Concrete patioTypical, 12 x 20 ft | $2,150 to $3,350 |
| Paver patioTypical, 12 x 20 ft | $4,800 to $7,700 |
| Block wall60 ft, 6 ft tall | $6,000 to $9,900 |
| Outdoor living area400 sq ft | $12,800 to $22,000 |
Planning numbers. Jose's free on-site quote is the real price. All cost guides
Permits in Upland
Permits for work in Upland go through the City of Upland. Under the California Building Code, flat work like a patio or walkway on grade usually needs no building permit, but a new driveway approach or curb cut needs a permit for work in the street, and walls over the code limits need one too. Jose checks what your job needs when he quotes it, and pulls any permit as part of the job.
Questions from Upland homeowners
Do you work in Upland?
Yes. Upland is about 25 miles east of our Whittier base. We build concrete, pavers, block walls and backyard hardscape in Upland and across San Bernardino County.
How much does a concrete driveway cost in Upland?
A two-car concrete driveway (about 480 sq ft) runs about $5,300 to $7,200 installed with a broom finish, in 2026 Southern California prices. Tear-out of an old driveway adds about $3 to $7 per sq ft.
Do I need a permit in Upland?
Permits for work in Upland go through the City of Upland. Under the California Building Code, flat work like a patio or walkway on grade usually needs no building permit, but a new driveway approach or curb cut needs a permit for work in the street, and walls over the code limits need one too. Jose checks what your job needs when he quotes it, and pulls any permit as part of the job.
How do I get a quote in Upland?
Fill out the short quote form with your zip code. Jose looks at every request himself, comes out to see the job and gives you a written price, free.