Resources / Pavers

Why the base under pavers matters more than the pavers

Pavers shift, dip and spread when the base is wrong. What a proper paver base is made of, how it is compacted, and how to tell if a bid skipped it.

By Jose Rubalcava · 2 min read

Two paver patios can use the same pavers and look identical the day they are finished. Five years later one is flat and the other has dips, lifted edges and weeds in every joint. The difference is underground.

What a proper base looks like

  • Excavation. Soil comes out deep enough for the base, the bedding sand and the pavers, usually 7 to 10 inches for a patio and more for a driveway.
  • Compacted sub-grade. The native soil gets compacted before anything goes on it.
  • Crushed rock base. Laid in layers, each one compacted with a plate compactor. Thicker for driveways than for patios.
  • Bedding sand. A thin, screeded layer the pavers sit on.
  • Edge restraint. Concrete or a spiked edge so the field cannot spread outward.
  • Joint sand. Swept in and compacted so the pavers lock together.

How to spot a thin bid

If a quote does not say how deep the base is or what it is made of, ask. If the answer is a couple of inches of sand on dirt, that is the patio that fails. Paying a little more for a real base is far cheaper than relaying the whole thing.

See what our paver jobs include, or start a free quote.

Questions

Questions

How thick should the base be under a paver driveway?

Thicker than a patio because of the load. The exact depth depends on the soil; the quote should state it.

Why do weeds grow between pavers?

Seeds land in the joints. Polymeric joint sand and a sealed surface cut that down a lot.

More from the blog

All articles
Get my free quote